Radio Touch
6 Appendix
The device is at the end of its serviceable life never throw it away in the household
waste under any circumstances. The local authorities provide information about
environmentally-friendly disposal.
When used as intended, this device complies with the requirements of the R&TTE
Directive (1999/5/EC). A complete declaration of conformity can be found on the
6.1 Technical Data
Radio Touch
Operating voltage
230 V~, 50/60 Hz
Rated current
0.2 A
Power consumption at rated output power
7 W
Stand-by operation
1.3 W
Music rated power output (sine) per channel
1.5 W
Loudspeaker impedance
4 ... 8
Ω
/channel
Input impedance
AUX IN
10
k
Ω
Frequency range FM
87.5 ... 108 MHz
Operating temperature
5 ... 40 °C
Protection class
II
Protection type
IP20
Connecting terminal
Screw terminals
Mains connection
2.5 mm²
Loudspeaker/AUX 1
mm²
Cable lengths:
Loudspeaker
max. 20 m
AUX IN
max. 3 m
Extension units
max. 50 m
Installation depth
33 mm
Loudspeaker
Loudspeaker impedance
8
Ω
Sine output/music output
4/8 W
Frequency range
170 Hz ... 20 kHz
Prefabricated cable length
approx. 30 cm
6.2 Accessories
Loudspeaker
2882 xx xx
Docking station
2883 xx xx
USB/3.5 mm Audio socket outlet
33 1539 xx xx
3 x Cinch/S-video socket outlet
33 1532 xx xx
Switches, controllers and timers are suitable as extension units. The same phase should
be used as for the radio.
6.3 Troubleshooting
Poor FM radio reception
Cause 1: Internal FM antenna insufficient for reception.
Connection an additional antenna (Figure 5, 15).
Cause 2: Stereo playback is selected.
Switch to Mono.
97-09894-000
Page 11/12
05/2013
