Glass sensor
Glass sensor 1 – 4gang
Order no.: 168xx, 169xx
Operation and assembly instructions
1 Safety instructions
Installation and assembly of electrical devices may only be carried out by an electrician.
The glass sensor is not suitable for direct switching of mains voltage or low voltage.
Failure to observe these instructions may lead to damage to the device, fire, or other
hazards.
These instructions are an integral component of the product, and must be retained by the
end user.
2 Structure of the device
(1)
(2)
(3)
Figure 1: Front view
(1) Sensor
surfaces
(2) White
LEDs
(3) Blue
LED
97-09440-000
Page 1/9
03/2007
