909E & 919E O
WNER
/O
PERATOR
M
ANUAL
• 17
3.
The knife must be cleaned before sharpening. See Page 15.
WARNING
TO AVOID SERIOUS INJURY, KEEP HANDS AWAY FROM
BLADE. SHARPEN 919E ONLY IN THE MANUAL POSITION.
S
HARPENING
I
NSTRUCTIONS
1.
Make sure the slicer is OFF
.
2.
Set shift lever to MANUAL on Model 919E Automatic Slicer
.
3.
Turn thickness control knob all the way to right to close the gauge plate
.
4.
Slide the product table toward you
.
5.
Loosen the product table locking knob
.
6.
Remove product table. Since the pusher can slide or rotate, keep product table level
.
7.
Lift the sharpener with left hand and rotate into sharpening position and lower with ONE STONE
on each side of the blade
.
8.
Place your left thumb on the sharpener cover for control, and pull the sharpening lever with your
left index finger until it stops
.
9.
Turn slicer ON with right hand
.
Hold lever for approximately 5 to 10 seconds. Use moderate
pressure. Release the sharpener lever.
10. Turn the slicer OFF with right hand
.
11. Return sharpener to storage position
.
12. After sharpening, clean and sanitize slicer as described on Pages 14 through 16.
