Plug in Mini Heater
K812
Instructions for Use
Please read and retain these instructions for future reference
v001: 24/05/22
The Enterprise
Department
UK Head Office, 11 Bridge Street, Bishop’s Stortford, CM23 2JU
Tel: 0844 4824400*, Fax: 01279 756595
www.coopersofstortford.co.uk
EU address: D.S.B. LD, 160 Bd. de Fourmies, 59100 Roubaix, France
Tel: (+44) 1279 701269
*UK Calls cost around 7 pence per minute
plus your telephone company’s network access.
Please check with your telephone supplier.
Note: The Plug in Mini Heater has automatic 12 hours default time feature.
Remote Control
(batteries required 1PCX button battery 2025 not included)
The heater can also be operated by remote control.
1. Standby and work status
Press
“ON/OFF”
to set standby or work status.
2. Timing setting
Press the
“Timer”
button until the desired set time is displayed.
3. Fan speed adjustment
Press
“Speed”
button to switch to “HH” (high speed) or “LL” (Low speed).
4. Temperature adjustment
Press
“+” or “
-
“ to
button to increase or decrease the temperature.
Care and Maintenance
WARNING
: Before beginning any maintenance, unplug your heater, and allow to cool completely.
To clean, wipe the exterior with a non-abrasive, damp cloth. Use a mild soap if needed. Dry with a soft cloth.
CAUTION: Do not let liquid enter the heater.
DO NOT
use alcohol, petrol, abrasive powders, furniture polish, or rough brushes to clean the heater. This
may cause damage to the casing of the heater.
1.
While Mini Heater is plugged in and turned on, press the
“Timer Button” to activate timer, as shown.
2.
Repeatedly press “Timer Button” to set number of hours
before Mini Heater turns off. You can choose between 1-
12 hours.
3.
Once desired hours have been chosen, stop pressing
“Timer Button” to set.
4.
To cancel timer, turn Mini Heater off.
