HIFI Stacking System J023 Instructions for Use
Please read and retain these instructions for future reference v002: 20/05/22
The Enterprise
Department
UK Head
Office, 11 Bridge Street, Bishop’s Stortford, CM23 2JU
Tel: 0844 4824400*, Fax: 01279 756595
www.coopersofstortford.co.uk
EU address: D.S.B. LD, 160 Bd. de Fourmies, 59100 Roubaix, France
Tel: (+44) 1279 701269
*UK Calls cost around 7 pence per minute plus your telephone company’s network access.
Please check with your telephone supplier.
Page No. 11
II) ENCODING 1 ENTIRE DISC
1)
Repeat the same procedures (1) to (2) as explained above.
2)
Then press
“REC“ button (
6) and the unit will start recording from the first tracks.
3)
After completion of encoding of the entire disc, unit will stop playback automatically.
4)
Press
“REC“ button (
6) again to terminate the recording.
III) ENCODING CD PROGRAM
1)
Repeat the same procedures (1) to (2) as explained above.
2)
Follow the procedure of “
CD/MP3 DISC PROGRAMMING
” to
program the tracks you want to record.
3)
Press C
D “PLAY/PAUSE” button (21) to play
the programmed tracks and then press “REC“ button (6
) to
start encoding.
4)
After the unit played all programmed tracks, the display will flash “REC 000”. Press “REC“ button (6)
again to terminate the recording.
Press “CD STOP” button
(20) to terminate program play.
IV) COPYING OF MP3 FILE
If inserting a MP3 disc instead of a CD-disc, the system will copy the files to
the USB if the “REC“ button (6
)
is pressed. The operation procedures is the same as for CD encoding as explained above, and the system
will switch to copying mode only if the MP3 file is being read.
B) CASSETE ENCODING
Se
t the function button (14) to “T
A
PE“ mode and then press the “REC“ button (
6) directly.
The LCD display (2) will flash
the word “REC USB“
when starting the encoding mode.
Start playback of cassette tape with the track you want to record.
After recording is finished, press the
“REC“ button (
6) again and the LCD stops flashing and returns to
“TAPE“
mode.
C) PHONO ENCODING
Press the fu
nction button (14) and set to “PHONO“ mode and then press the “REC“ button (6
) directly.
The LCD display will flash
the word “
REC
USB“
when starting the encoding mode.
Start playback of the track which you want to record.
After recording is finished, press the
“REC“ button (
6) again and the LCD stops flashing and returns to
“P
HONO
“ mode.
REMARK:-
-
The recording speed is 1:1 and according to the actual playing time of the CD track
-
The system will create a
n “REC“ folder and then store the encod
ed track in it.
-
The recording format is pre-set at
–
MP3 bit rate : 192 kbps.
-
No song title will be recorded during encoding mode.
-
To i
nterrupt the recording, press “REC“ button (2
5) during recording mode.
-
Volume cannot be adjusted during recording process. So, please adjust the volume before the
