HIFI Stacking System J023 Instructions for Use
Please read and retain these instructions for future reference v002: 20/05/22
The Enterprise
Department
UK Head
Office, 11 Bridge Street, Bishop’s Stortford, CM23 2JU
Tel: 0844 4824400*, Fax: 01279 756595
www.coopersofstortford.co.uk
EU address: D.S.B. LD, 160 Bd. de Fourmies, 59100 Roubaix, France
Tel: (+44) 1279 701269
*UK Calls cost around 7 pence per minute plus your telephone company’s network access.
Please check with your telephone supplier.
Page No. 10
in the specified order.
7.
P
ress “
CD STOP
” button
(20) to terminate program play.
➢
P
ress “
CD STOP
“ button (20)
in CD stop mode to cancel all tracks being programmed.
PLAYBACK OF MP3 SONG VIA USB STORAGE MEDIA
CONNECTING
The system is able to decode and playback all MP3 files stored in the memory media with USB connecting
port.
Plug-in the USB plug with the face up & make sure it goes in completely.
Connecting the USB upside down could damage the audio system or the storage media. Check to be sure
the direction is correct before connection.
Press Function button (14) C
D/USB repeatedly to select “USB”
mode.
The system will start reading the storage media automatically after connecting, and LCD display (2) will
show the total number of MP3 files being detected.
Repeat the same playback procedure as playing CD/MP3 disc as above
REMARK:-
The system can detect and read files in MP3 format only though the USB port.
If connecting the system to an MP3 player via the USB socket, due to variances in MP3 encoding format,
some MP3 player may not be able to play via the USB socket. This is not a malfunction of the system.
The USB port does not support connection with a USB extension cable and is not designed for
communication with a computer directly.
ENCODING
Note: It is illegal to copy music to distribute it to others. Copying is for your personal use only.
ENCODING OF CD FILE INTO MP3 FILE
The system is able to encode a normal CD to MP3 format and record to memory media via the USB
connecting port.
A) CD ENCODING
I) ENCODING 1 TRACK
1.
Perform normal playback of the CD track you want to encode and record.
2.
Remained at CD stop mode and adjust the volume before recording starts.
3.
Select a track by pressing skip up
or down
buttons (23,24) and then p
ress “REC“ button (
6).
4.
The system will flash
“REC”
and the recording track number when encoding is happening.
5.
Press
“REC“ button (
6) again to terminate the recording.
