Film and Slide Scanner
H031
Instructions for Use
Please read and retain these instructions for future reference
v001: 14/08/20
4. Loading Slides
Hold up the slide toward the light. Face the trademark side of the slide away from you. Look through
the slide and it should appear normally (not a mirror image).
Now turn the slide so the image is upside down while looking at the same side.
Open the slide holder at the marked spot on the top.
With the slide holder laid open place the slide into recessed area in the holder- the slide should fit
perfectly.
Note
: Handle slides with care. Any dust scratches or fingerprints will show up on your saved images. It is
recommended to wear cotton gloves when handling slides. It is recommended to use compressed air to
remove any dust on the slides. You can purchase it from an office supply or electronics retailer.
Close the slide holder and press the edges so that it locks in place.
Hold it in the position as shown in the film & photo scanner.
Insert the Slide Holder into the slot on the right side of the film & photo scanner as shown.
