Film and Slide Scanner
H031
Instructions for Use
Please read and retain these instructions for future reference
v001: 14/08/20
or
User can press LEFT/RIGHT button to select language, then press ENTER button to confirm
USB mode
After finishing scanning, please take out the memory card from the film & photo scanner to download the
stored images from the memory card.
When the device is connected with USB cable to PC, User can also press MODE button to main
menu, then press LEFT/RIGHT button to select USB mode, then press ENTER button to confirm, the
film & photo scanner will become a mass storage device and user can review or edit images on PC.
User can also press MODE button to go back to main menu.
Trouble shooting
Question:
There is unwanted stripe appearance at the edge of the image.
Answer:
If it is slight stripe, move the slide holder gently to and fro in the device until the stripe is no
longer visible in the preview window. If the stripe is still, please contact with our retailer.
Question:
The device cannot connect to the computer.
Answer:
Please check if the cable has already connected to the USB port of the computer. Or connect
the cable to another USB port. It is recommended that connect it to the motherboard directly, not to
the front panel.
Turn on the power button, enter USB mode, it acts as a mass storage device.
Cleaning:
We strongly suggest using a clean, dry, non-alcohol cotton swab to clean the glass surface
periodically to produce a clear image.
