Rechargeable Wet & Dry Hand Vac
H007
Instructions for Use
Please read and retain these instructions for future reference
v001: 30/09/20
Problem
Solution
The vacuum will not pick up or the suction
power is weak.
The dust container may be full, or the filters may
require cleaning. Empty the dust container and clean
the filters.
There may be blockages in the filters or dust tank.
Check for blockages and clean the filters and dust tank
as detailed in the “Cleaning and Maintenance” section.
Dust is escaping from the vacuum
The filter may not be installed correctly or the dust
container may be full. Empty the dust container and
reassemble the filter system.
The vacuum is making an unusual sound or
humming
The airflow may be restricted or blocked. Check for
blockages and clean the filters and hose as detailed in
the “Cleaning and Maintenance” section.
Cleaning and Maintenance
Empting the Dust tank
Note: Ensure the vacuum cleaner is turned off and unplugged from the mains before emptying the dust tank.
1.
To remove the dust tank from the vacuum cleaner, press the release button on the main body of the
unit, pull the tank firmly towards you and away from the main body of the vacuum.
2.
Once the dust tank has been removed, pull out the filter from inside. To do this, grip the small tab
marked “Pull” on the lip of the filter and pull it firmly upwards and away from the dust tank.
3.
Once the filter has been removed, tap it over a rubbish bin or similar surface to remove any dust residue
inside3, rinse it under running water and leave it to dry.
Note: Ensure the unit is thoroughly clean and the filter is completely dry before attempting to use or store it.
4.
Ensure the filter is inserted back into the unit before using it again.
Clearing Blockages
If the dust tank is overfilled, the filter is clogged up, or the vacuum picks up a larger piece of debris, the
vacuum may become clogged.
Should this occur, carry out the following steps to unclog the vacuum:
1.
Check the dust tank and empty it if necessary.
2.
Check the filter for any debris and rinse it under running water if necessary, as detailed in the sections
above.
3.
Detach any attachment from the unit and check for blockages.
Storing the Appliance
Unplug the appliance from the mains and remove any attachments from the front of the unit.
Store the appliance in a cool, dry place and out of the reach of children.
PLUG WIRING (UK & IRELAND)
This appliance is supplied with a mains adaptor/charger with BS1363 plug pins.
DO NOT
use If the socket outlets in your home or office are not suitable for this product’s mains adaptor/
