USER MANUAL 1.0 | EC-COM COMMUNICATION MODULES
Berghof Automationstechnik GmbH | Harretstrasse 1 | 72800 Eningen | www.berghof.com
2VF100055FE04.docx | EC_COM_HB_en_2D1972000ZD00.docx
21
3.
Annex
3.1. Environmental Protection
3.1.1. Emission
When used correctly, our modules do not produce any harmful emissions.
3.1.2. Disposal
At the end of their service life, modules may be returned to the manufacturer against payment of an all-
inclusive charge to cover costs. The manufacturer
will then arrange for the modules to be recycled.
3.2. Maintenance/Upkeep
WARNING
Do not insert, apply, detach or touch connections while in operation
–
risk of destruction or malfunction.
Disconnect all incoming power supplies before working on our modules; this
also applies to connected peripheral equipment such as externally powered
sensors, programming devices, etc. All ventilation openings must always be
kept free of any obstruction.
The modules are maintenance-free when used correctly.
Clean only with a dry, non-fluffing cloth.
Do not use detergents!
3.3. Repairs/Service
WARNING
Repair work may only be carried out by the manufacturer or its authorised ser-
vice engineers.
3.3.1. Warranty
Sold under statutory warranty conditions. Warranty lapses in the event of unauthorised attempts to repair
the equipment and/or product, or in the event of any other form of intervention.
