25
3. Quick Start
3.1 How to Start in Camera?
Switch ON ”Power Switch”
Note: Camera comes pre-programmed with factory default settings. So for test pur-
pose, user only needs insert a SD card and batteries to start test by powering on.
3.2 How to Set the Functions?
a Switch ON ”Power Switch”, Press ”OK” once to enter Test mode; then press button
”Menu” once to enter camera setting menu;
Use navigation buttons ”
←
”, ”
↑
”, ”
→
”, or ”
↓
” to obtain favored settings, press ”OK” for con-
firmation and save the preferred change,
press ”Menu” to exit current page;
c. Exit main
menu, then press button ”OK” for 3 secs to enable camera to work on PIR.
Note: For some settings, user needs to press ”Menu” to save & exit the configuratin
after pressing ”OK” to confirm; (Cam ID, Deley, Time Lapse, Timer, Password).
3.3 Camera Default Settings in
Red Letters
Cam
Pir
Other
Cam ID
Sensitivity
Language
OFF
/ON
High
/Middle/Low
English...
Cam Mode
Delay
Date/Time
Photo
/PIC+Video
OFF
/ON
Month : date : year
hour : minute : second
Resolution
Time Lapse
5MP
/8MP/12MP
OFF
/ON
Time Stamp
OFF/
ON
Night Mode
Timer
Balanced
OFF
/On
Battery Type
Min. Blur
Alkaline/NI-MH
Max Range
Frequency
Multi-shot
50Hz
/60Hz
IP
/2/3/4/5P
SD Cycle
PIC+Video/Video ON
OFF
/ON
Video Size
Reset
1080/
720P
/D1
Yes
/No
Video Lenght
Password
0,5
-60Secs
OFF
/ON (6digits)
About
Firmware version
