32
3. Max Range offers better IR flash range. Given IR flash range values are based
on Max Range setting; so please adjust Night Mode to Max Range for better night
vision flash range;
4. High-quality 1.5V NiMH or Lithium rechargeable AA batteries can also offer much
better IR flash range; alkaline batteries cannot deliver enough amperage to power
the illuminator consistently at night;
5. To ensure accuracy and quality of night time image, please mount camera to dark
environment without any obvious light sources;
6. A certain surroundings (like trees, walls, ground, etc.) within flash range can get
you better night time images; please do not aim camera to total open field where
there is nothing within IR flash range to reflect flash back; it’s like shinning a flash-
light into sky in night, you just can’t see anything; same does camera;
6.4 Photos Do Not Capture Subject of Interest
1. Check the ”Sensor Level” (PIR sensitivity) parameter setting. For warm environ-
mental conditions, set the Sensor Level to ”High” and for cold weather use, set the
sensor for ”Low”.
2. Try to set your camera up in an area where there is not a heat source in the ca-
mera’s line of sight.
3. In some cases, set the camera near water will make the camera take images
with no subject in them. Try aiming the camera over ground.
4. Try to avoid setting the camera up on small trees that are prone to being moved
by strong winds.
5. Remove any limbs which are right in front of the camera lens.
7. Warranty
We grant on this product a guarantee of 24 months, according to the pertinent
statutory regulations, from the date of the purchase by the initial user.
This guarantee covers all material or production defects; however, it does not
cover the following: Faults and defects resulting from normal wear, including we-
aring parts, seals etc.; damages or defects arising or as a result of alteration.
We reserve the right to reject a guarantee claim if the purchase cannot be proven,
or if the product was improperly serviced or was obviously erroneously maintai-
ned (not or insufficiently maintained; cleaning and servicing).
Please retain the proof of purchase documentation because this is valid as proof
of date of purchase.
In case of a guarantee claim, the machine must be returned to the dealer in a
clean state, and in its original packaging if possible, and not disassembled in any
way. Proof of purchase must also be included.
