background image

Blz. 17

8.0 Warranty

1. The owner of this BERG Toys product has the following warranty conditions on this product.

•  frame: 5 years after date of purchase.
• all other parts: 2 years after date of purchase.
• parts subject to wear and tear (such as chain and tyres): no warranty.

2. The warranty only covers material or construction defects with regard to this product or parts of the pro-

duct.

3. The warranty expires in the following situations:

• incorrect and/or careless use of this product and use not according to the intended purpose.
• the product was not assembled and serviced according to the construction manual.
• technical repairs to the product have not been carried out professionally.
• parts mounted afterwards do not meet technical specifications of the product involved or have not

been mounted correctly.

• defects as a result of climatological factors, such as corrosion or normal ageing of the varnish.
• the product is in use as a rental or is in another way available to several persons unspecified.

4. BERG Toys is explicitly not liable for damage to (parts of) the product as a result of:

• incorrect tune-up of driving mechanism, incorrect tyre pressure, incorrect adjustment of wheel, chain

and hubs.

• parts, such as chain and tyres, not replaced in time.

5. In the warranty period all material or construction defects as determined by BERG Toys will either be

repaired or replaced, liberty of BERG Toys.

6. The owner of this product can only make a warranty claim by offering the product for inspection to a

BERG Toys dealer.
The original warranty certificate (with dealer stamp and fully completed) should be presented to the
dealer at the same time, and with original bill of purchase. If the owner has moved or the dealer is no
longer available under the name of BERG Toys the name of the nearest BERG Toys dealer will be pro-
vided upon request.

7. If the warranty has not been presented, the owner will take care of all costs.

8. The warranty certificate is not transferable to other persons.

Handleiding ENG Parti:Handleiding ENG  16-01-2008  11:27  Pagina 17

Содержание Go-KART



















Отзывы: