BERG Go-KART, Руководство пользователя

Страница: 11 / 18

Blz. 11
Brake Freewheel BF
The brake freewheel works like a back-pedalling
brake and has a neutral. The brake freewheel can
be put in reverse.
Depending on the frequency with which the BERG
go-kart with freewheel (Fig. 12) is used the two
chains need to be checked every six months for
being well tightened (see section 4.4.1).
If your go-kart is equipped with a BF-7 transmission
hub, the gears will need to be adjusted at least
every six months. The adjusting procedure is as
follows:
When removing the rear cover you see the click box
on the transmission hub. If you loosen the knurled
head screw E, the click box can be removed from
the axle. Both of the pins and the plastic clip stay
on the hub. Put the rotary switch in 4th gear. The
arrows in F should be pointing towards each other
now. If this is not the case: turn screw G. For other
problems consult your dealer. (Fig. 13)
E
F
G
Klick-box
Fig. 12
Fig. 13
Fig. 14 Fig. 15
•
Brake Freewheel BF-7
•
•
Brake Freewheel BF-3
If your go-kart is equipped with a BF-3 gear hub,
the gears should be tuned at least every six
months. This is done in the following way:
Remove the back hood to see the little black box at
the end of the cable. (Fig. 14) With this box the cable
length can be adjusted. With the switch on 3 (Fig. 15)
the box should have about 2 mm lateral backlash.
Check if the outside cable is far enough into the
bushes at both ends and whether there are no
kinks in the cable. In order to tighten the cable
(for example because first gear is not working) the
end of the chain is pushed further into the box.
In order to loosen the cable (for example because
third gear is not working) the lip at the end of the
box is pushed in.
Handleiding ENG Parti:Handleiding ENG 16-01-2008 11:25 Pagina 11