Translated user manual (EN-V1)
BENOMIC S500
35 / 57
8.4
Operation of the stabilizers
Stability must be ensured in order to work at height. Therefore, the BENOMIC S500 is
equipped with stabilizers at the front and rear of the trolley. Depending on the type of pipe
rail system, it is necessary to use these stabilizers in order to be allowed to work at height.
Chapter 10.1 'Explanation of technical specifications' lists the restrictions that apply.
If the soil has insufficient bearing capacity, work may not be carried out at height, see
recommendations in chapter 7.3. For a description of the soil conditions, refer to the
Health and Safety Catalogue applicable in the Netherlands.
This paragraph describes the actions to be taken in order to use the stabilizers correctly.
Fig. 8.4; Overview of stabilizers in
Drive to the spot where you want to work at height and put the direction switch (6) in the
neutral position, also turn the speed control knob (7) to zero. Step down to activate the
stabilizers with the working platform at the lowest position.
Handwheel
Stabilizer post with
locking holes
Locking pin
Stabilizer foot
A
B
D
C
E
