Translated user manual V9-EN
BeNomic EasyLeaf
28 / 44
8.3 Pipe rail system maintenance
The pipe rail system on which the
BeNomic EasyLeaf
runs should be checked on a regular
basis. The pipe rail system must comply with the requirements of the health and safety
catalogue in force in the Netherlands for pipe rail systems. It is prohibited to use the
BeNomic
EasyLeaf
on a pipe rail system that does not satisfy these guidelines.
Ensure that all the pipes have sufficient support with a maximum separation distance of 1.25
m for pipe 51 and 1 m for pipe 45 and that the supports are not out of line with respect to the
pipes (clamped). Moreover, the pipes on the concrete path should be secured and must not
be loose. The end of the pipe must protrude at least 15 cm over the concrete path. At the pipe
ends (in front of the wall) there should be an end-stop welded on that is at least 5 cm high - at
the end of each season check whether the stops are still functioning properly. The ground
under the pipe rail system should be dry, flat, and hard. Soft or damp spots should be repaired,
and surface indentations permanently repaired.
8.4 Platform height securing mechanism
maintenance
Lubricate the locking catches of the height lock every month with silicon spray and check that
the lock reliably clicks into the holes.
Depending on the use of disinfectants, the maintenance frequency must be increased.
Put the platform in its highest position and spray the silicone spray as shown on the photo
below on both sides of the height securing mechanism: