Translated user manual V9-EN
BeNomic EasyLeaf
17 / 44
Additional options, accessories and spares must be ordered and supplied
exclusively by the manufacturer, Berg Hortimotive.
The safety pictograms which have been fitted on the
BeNomic EasyLeaf
(see
chapter 3.2: Repetition of the safety pictograms used) must be visible at all
times.
Be extra vigilant during the installation!
The risk of incorrect functioning whilst putting into operation is higher than
normal. If the
BeNomic EasyLeaf
has not been set up correctly, it may pose a
hazard. Be sure that the platform height has been secured correctly.
The
BeNomic EasyLeaf
has been specially designed for running on a pipe rail system. The
BeNomic EasyLeaf
was checked for proper functioning and safety, before leaving the Berg
Hortimotive factory. Prior to starting up the
BeNomic EasyLeaf
, the items described in article
6.1 must be inspected.
The pipe rail system must comply with the requirements as laid down in the horticulture sector
guidelines from the health and safety catalogue in force in the Netherlands. The minimum
specifications are given at Article 5.3 for the track width, pipe diameter and supports.
The pipe rail specifications have been taken from the health and safety catalogue in force in
the Netherlands for pipe rail systems. For the full contents of this policy regulation, we refer
you to the Ministry of Social Affairs & Employment.