Beretta Power Plus Box 150, Руководство по установке, Страница: 44 / 60

44
Example of a cascading configuration with 1 system Power Plus Box 200 and 1 Power Plus Box 150
In this case, there are two blocks: the first consisting of four generators and the third of three. Therefore, two blocks must
be configured, respectively with addresses 1 and 2. The slave addresses (J10) must not be changed.
1 2 3 4
OFF
ON
Master
Slave Slave Slave
Master
Slave Slave Slave
FIRST modular system SECOND modular system
BLOCK 1 BLOCK 2
J14
Slave
1 2 3 4
OFF
ON
Address for BLOCK 1 Address for BLOCK 2
POWER PLUS BOX 200 POWER PLUS BOX 150
BLOCK address table
Microswitches
BLOCKS
1 2 3 4
OFF OFF OFF OFF Emergency
OFF OFF OFF ON 1st block = 1st modular system
OFF OFF ON OFF 2nd block = 2nd modular system
OFF OFF ON ON 3rd block = 3rd modular system
OFF ON OFF OFF 4th block = 4th modular system