Beretta IDRA N DS 1500, Руководство по установке

Страница: 15 / 28

15
Fitting the insulation (IDRA DS 2000 and 3000)
Once the storage cylinder is correctly positioned inside
the room where it is to be installed, proceed to fit the
insulation and the accessories to complete the cylinder.
Proceed as follows:
- Unpack all the material from the second package.
- Fit the anodes (1) and (2).
- Wrap the insulation (3) around the storage cylinder,
carefully lining up the fittings with the holes on the insi-
de of the insulation. Secure the insulation in place with
the zips (4) at the edges of the two sections.
- Perforate the insulation at the fittings and fit the insula-
tion sleeves (5).
- Fit the flange cover (6).
- Finally, fit the insulation top panel (7) and cover it with
the cover (8).
b
With all the insulation in place, apply the serial number
plate, data plate and product identification plate to ensu-
re that the storage cylinder can be accurately identified
(see the plate positions on page 6).
3
3
4
4
4
1
2
5
7
8
6