USE
17
0
Do not open the access covers and carry out technical or clean-
ing activities before disconnecting the unit from the power grid
by positioning the system's main switch in the "OFF" position.
cleaning the remote control
— clean with a soft and dry cloth
cleaning the housing and front panel
— wet a sponge or soft cloth with water and soap to wash
— once cleaning is over dry surfaces with care
9
Do not use water at a temperature that is higher than 40°C, pow-
der or abrasive detergents, solvents and brushes.
mesh filter cleaning
Cleaning the mesh filters ensures trouble-free operation of the climate
control system.
1
Mesh filters
1
— open the front panel
— take out the mesh filter by grabbing the relevant fins
— remove exhausted purifying filters if present
— remove dust with an vacuum cleaner
9
Stubborn dirt can be removed by washing the filter in a luke
warm (max. 40°C) solution of water and neutral detergent. After
washing, rinse the filters well and leave to dry in the shade.
9
Exposing the filters to the sun or washing them with water at
a temperature that is higher than 40 °C can cause the filters to
shrink.
0
It is forbidden to use the device without mesh filter.
Purifying filter replacement
The cleaning of the purifying filters, if present, allows the optimal op-
eration of the air conditioner and guarantees the quality of the treated
air.
To replace the filters:
1
Mesh filters
1
— open the front panel
— take out the mesh filter by grabbing the relevant fins
1
Mesh filters
2
Air purifying filter
2
1
— remove exhausted purifying filters
— insert new purifying filters into the prearranged slots
— to reposition them, proceed in reverse order
9
Keep the purifying filters sealed until their actual use.
9
Installing the purifying filters reduces the air flow and results in
lower performance. It is advised to use the device at the highest
speeds.
