Beretta 20086803, Инструкция по установке и эксплуатации

Страница: 3 / 20

This manual, Code Doc-0071222 - Rev. 3 (07/17) comprises 20 pages.
3
Dear heating engineer,
We would like to congratulate you on having recommended a
B
solar storage cylinder unit: a modern product that's
capable of ensuring a high degree of reliability, efficiency, quality and safety.
While your technical skills and knowledge will certainly be more than sufficient, this booklet contains all the information
that we have deemed necessary for the device's correct and easy installation.
Thank you again, and keep up the good work,
Beretta
CONFORMITY
B
storage cylinders conform to DIN 4753-3/UNI and UNI EN 10025 standards.
RANGE
MODEL CODE
IDRA N DS 1500 20136241
IDRA N DS 2000 20136242
IDRA N DS 2600 20086803
ACCESSORIES
For a complete list of accessories and details of their compatibility, refer to the Catalogue.
CONTENTS
The following symbols are used in this manual:
b
CAUTION! = Identifies actions that require caution
and adequate preparation.
a
STOP! =
Identifies actions that you MUST NOT do.
This manual, Code - Rev. comprises pages.
GENERAL 4
1 General Safety Information . . . . . . . . . . . . . . . . . 4
2 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3 Description of the appliance . . . . . . . . . . . . . . . . 5
4 Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
5 System layout. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
6 Technical specifications . . . . . . . . . . . . . . . . . . . 6
7 Location of sensors . . . . . . . . . . . . . . . . . . . . . . . 7
8 Overall dimensions and water fittings . . . . . . . . . 8
INSTALLER 9
9 Unpacking the product . . . . . . . . . . . . . . . . . . . . 9
10 Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
11 Installing the magnesium anodes . . . . . . . . . . . 11
12 Fitting the insulation . . . . . . . . . . . . . . . . . . . . . . 12
13 Place of installation . . . . . . . . . . . . . . . . . . . . . . 13
14 Installation in older systems and systems
requiring modernisation. . . . . . . . . . . . . . . . . . . 13
TECHNICAL ASSISTANCE CENTRE 14
15 Putting into service . . . . . . . . . . . . . . . . . . . . . . 14
16 Temporary shutdown . . . . . . . . . . . . . . . . . . . . . 14
17 Preparing for extended periods of disuse . . . . . 14
18 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
19 Cleaning and removing internal components . . 15
20 Recycling and disposal . . . . . . . . . . . . . . . . . . . 16
21 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . 16
END USER 17
22 Start-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
23 Temporary shutdown . . . . . . . . . . . . . . . . . . . . . 17
24 Preparing for extended periods of disuse . . . . . 17
25 External maintenance . . . . . . . . . . . . . . . . . . . . 17