Berchtold Operon D760 Скачать руководство пользователя страница 91

Страница: 91 / 109

7.3 Symbols on the packaging

The following symbols are located on the packaging. Always heed sym-
bols during transport.

The tips of the arrows indicate the top of the package. They must always
point up or contents could be damaged.

Keep packages dry and protect from wetness.

Identifies packages with fragile or sensitive contents.
Handle the package with care, do not drop it, and keep it from being
bumped.

7.4 Transport

Shipping items attached to pallets can be transported with a forklift un-
der the following conditions:

The construction of the forklift truck must be appropriate for the
weight of the units under transport,

The item must be firmly secured to the pallet.

1. Drive the forklift truck forward, positioning the forks between or be-

neath the pallet rails.

2. Drive forward until the forks protrude from the opposite side.
3. If the center of gravity is off-center, make sure the pallet cannot over

balance, by applying restraint straps.

4. Lift the pallet with the item and begin transport.

Protect from wetness.

Fragile

Transporting pallets with a
forklift truck

Transport

Operator Manual Surgical Mobile Operating Table Models D860, D850, D 830, D820, D770, D760

Transport, packaging and storage

Содержание Operon D760














































































































Результаты поиска

Содержание Operon D760

Отзывы:

Похожие инструкции для Operon D760

Бренды по названию

Популярные бренды

Berchtold Operon D760, Руководство оператора

Результаты поиска

Содержание Operon D760

Отзывы:

Похожие инструкции для Operon D760

Бренды по названию

Популярные бренды