6
Product information
6005737_0 – 31.03.2021
2.2
Operating modes
The device is suitable for the following operating modes:
y
Recirculated air mode
y
Extracted air mode
y
Hybrid mode
2.2.1
Recirculated air mode
The filter filling in the recirculated air filter neutralises any
smelly odours present. The odour-free, cleaned room air is
fed back into the room. The humidity in the room can be
reduced with the fresh air feed.
In recirculated air mode, it is necessary to use the run-on
function so that the device can remove the remaining
odours. Using the run-on function increases the life of the
filter filling. The filter filling must be replaced at regular
intervals.
2.2.2
Extracted air mode
The cleaned room air can be routed to the outside via the
building structure (e.g. ducting, chimney).
With extracted air mode an adequate fresh air supply is
required. The device can only extract the amount of air to the
outside that is present in the room or which is drawn into the
room.
2.2.3
Hybrid mode
In hybrid mode, it is possible to select flexibly between
recirculated air mode and extracted air mode.
In extracted air mode, the cleaned room air is routed to the
outside through the wall box which opens automatically.
Extracted air mode is recommended in summer or with
particularly intensive frying.
In recirculated air mode the wall box remains closed. The
filter filling in the hybrid filter neutralises any smelly odours
present. The odour-free, cleaned room air is fed back into the
room.
The recirculated air mode is recommended in winter if no
warm room air is to be surrendered to the outside.
2.3
Product overview
E
D
F
G
A
B
C
H
A Chimney
B Hood body
C Control panel
D Lower section of the hood body
E Lower section (removable)
F Separating unit (removable) consisting of centrifugal
separation and catchment screen (“Capillar Trap”)
G Ratings plate (in the air induction shaft of the separating
unit)
H Hob lighting
E
D
A
B
C
A Sockets for accessories
B BackFlow port (with use of the BackFlow technology)
C Control box
D Adjusting screws for alignment
E Socket for the mains cable
