Berbel BKH 120 FO, Инструкции по эксплуатации и монтажу

Страница: 30 / 36

30
Dismounting
6005044_0 – 04.12.2019
7. Dismounting
D
WARNING!
Danger of injuries through improper handling!
Taking the device down requires a great deal of physical
exertion due to its size and weight. If the device falls down,
serious injuries are possible.
☞
Two persons are required to take the device down.
☞
Ensure stable footing when taking the device down.
☞
Ensure that no other people are in the working area.
D ATTENTION!
Danger of property damage through improper handling!
Taking the device down requires a great deal of physical
exertion due to its size and weight. If the device falls, the
device, kitchen furnishings and other objects could be
damaged.
☞
Cover the cooled hob.
☞
Keep the installation area clear.
☞
Disconnect all poles of the power supply for the device.
☞
Pull out the mains plug.
☞
Loosen the inner chimney duct from the chimney mount.
☞
Lift the chimney away from the device.
If present:
☞
Remove any accessory connection cables.
For exhausted air and hybrid operation:
☞
Remove the exhaust air duct.
For recirculating air and hybrid operation:
☞
Remove the filter.
☞
Loosen the mounting screws by approx. one turn.
☞
Lift the device with two persons.
☞
Lift the device off, forwards.
☞
Set the device down on a firm and protective surface.
8. Disposal
8.1 Dispose of packaging
D ATTENTION!
Risk of environmental damage due to improper disposal
of the packaging!
☞
Do not put the packaging into the normal household
waste.
☞
Take the packaging for environmentally friendly and
proper recycling.
The packaging provides protection from transport damage.
Only the original packaging guarantees sufficient protection
during transportation.
☞
Store the packaging in a location which is inaccessible to
children.
The packaging materials have been selected from an
environmentally friendly perspective and are made from
re-usable materials. The packaging materials can be returned
to the raw materials cycle after use. This saves valuable raw
materials.
y The outer packaging is made from cardboard.
y The filling material and the insets are made from
cardboard or polythene (PE).
y The protective film and bags are made from
polythene (PE).
☞
Dispose of the packaging in an environmentally friendly
manner, separated by materials.