Berbel BKH 120 FO страница 26 Скачать руководство пользователя

Страница: 26 / 36

Cleaning

6005044_0 – 04.12.2019

Lower section

The lower section is integrated in the front panel.

☞

Open the front panel.

☞

Grasp the lower section by the handle recesses.

☞

Lift the lower section.

☞

Pull the lower section out forwards.

☞

Clean the lower section with a soft, moist cloth.

☞

Dry the upper and lower sections with a soft cloth.

Upper section and bulging edge

The upper section is permanently attached to the device.
The bulging edge is attached and held in the device by
magnets.

☞

Pull the bulging edge from the upper section.

☞

Clean the upper section with a soft, moist cloth.

☞

Clean the bulging edge, such as in a dishwasher.

☞

Make sure the bulging edge is completely dry.

☞

Dry the upper section with a soft cloth.

Capillar Trap

The Capillar Trap is inserted and is held in the device through
a side lock.

☞

Grasp the Capillar Trap on its sides with both hands.

☞

Pull the Capillar Trap out.

☞

Clean the Capillar Trap e.g. in a dishwasher.

☞

Clean the surfaces and edges on the recess for the
Capillar Trap with a soft, moist cloth.

☞

Make sure that the Capillar Trap is completely dry.

After cleaning, the interior parts should be reinserted.

“3.5.11 Insert the Capillar Trap, bulging edge and lower
section” (page 18).

Содержание BKH 120 FO





































Результаты поиска

Содержание BKH 120 FO

Отзывы:

Похожие инструкции для BKH 120 FO

Бренды по названию

Популярные бренды

Berbel BKH 120 FO, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание BKH 120 FO

Отзывы:

Похожие инструкции для BKH 120 FO

Бренды по названию

Популярные бренды