12
13
starting
your
electric
washer
How to Start Your Pressure Washer
To start your pressure washer for the first time, follow these instructions
step-by-step. This starting information also applies if you have let the
pressure washer sit idle for at least a day.
1.
Plug GFCI into the electrical socket.
2.
Connect high pressure hose into pump outlet.
3.
Connect garden hose to water inlet on pressure washer pump.
4.
Attach wand extension to spray gun. Tighten by hand.
5.
Choose desired spray tip. Pull back nozzle extension collar, insert
spray tip, and release collar. Tug on spray tip to make sure it is securely in
place. See
Spray Tips.
NOTICE
DO NOT run the pump without the water supply connected and
turned on.
• Damage to equipment resulting from failure to follow this instruction
will void warranty.
6.
Turn water supply all the way on.
7.
Pull trigger for 30 seconds to draw water in and release air bubbles.
8.
With trigger pulled, press “ON” button to start motor.
Allow 15 seconds for pressure to build.
WARNING
The high pressure stream of water that this
equipment produces can cut through skin and its
underlying tissues, leading to serious injury and
possible amputation.
• NEVER connect high pressure hose to nozzle extension.
• Keep high pressure hose connected to pump and spray gun while
system is pressurized.
• Always be certain spray gun, nozzles and accessories are correctly
attached.
starting
your
electric
washer
