Beper URC8805, Инструкции по применению

Страница: 13 / 44

13
MANUALLY QUICKLY CODE PROGRAMMING
If it can not control your device after code-entry or you can not find the brand and code
in the Device Brand Code List, please use this function to source the code that you
need.
1. Turn on all the electronic devices (such as TV, DVD, VCR, SAT…) you want to pro-
gram the remote to operate.
2. Press and hold the device button and [Power] key and keep about 3 seconds until
the device’s LED indicator lights up.
3. Press [CH+] or [CH-] one step at a time until one of your device turn off. Each time
you press the [CH+/-] button, the device button will light up. As soon as the device turns
off, stop pressing the [CH+/-] button.
4. Press OK or any Device key to save and go out.
NOTE:
1. In this feature. You can press [CH+] to forward search and press [CH-] to back off
search the code libraries in the remote control.
2. Given the bulk of the code libraries in the remote control, it will take several minutes
to cycle through all the code when using the Manually Quickly Code Programming
method.
AUTOMATIC QUICKLY CODE PROGRAMMING
If these two ways still can not control your device, please have a try to source your
device code.
1. Turn on all the electronic devices (such as TV, DVD, VCR, SAT…) you want to pro-
gram the remote to operate.
2. Press and hold the device button and [Power] key and keep about 3 seconds until
the device’s LED indicator lights up.
3. Press [POWER] button and enter Automatic Quickly Code Programming. Per 1.5
seconds, this remote will transmit a code of [POWER] or [PLAY] or [0] per 1.5 seconds
automatically. The LED indicator light up. When the device to be power off, press [OK]
or [Power] to save and go out.
NOTE:
1. In this feature. You can press [CH+] to forward search and press [CH-] to back off
search the code libraries in the remote control.
2. The device button will light off and go out when using this feature to search cycle
through all the codes.
ONE BUTTON FAST SEARCH CODE PROGRAMMING
You only need to use one key to make the operation. You can source the suitable
device code quickly.
1. Turn on all the electronic devices (such as TV, DVD, VCR, SAT…) you want to pro-
gram the remote to operate.
2. Press and hold the device button such as [TV] that you want to control device, until
the device turn off then release the device button.
3. Testing and checking other keys can control your device or not, if not, please return
step 2 to search again. Until searched the better code for you device.
NOTE:
During you use this function to search you setup code, you can use the speedup func-
tion to quicken up search you device code: press and hold the [Guide] button and keep
about 5 seconds, until the device turn off then release the [Guide] button.