Beper RI086, Инструкции по применению

Страница: 9 / 32

ENGLISH
PTC Fan Heater Use instructions
9
PRODUCT DESCRIPTION Fig. 1
1 – Carry handle
2 – Thermostat
3 – Function selector
4 – Swing function
5 – Indicator light
6 – Protection grid
7 – Base
8 – Power cable
Usage:
1. Please check before you use:
A: The heating wire and electric wire can not be broken.
B: Please do not use the socket lower than 10A for fear of any accident.
2. Use the fan heater on the flat place to avoid being toppled.
3. Power & turbo knob:
“O”: OFF
: for low heat
: for high heat
4. There is a thermostat knob for adjusting heating. You can rotate the knob to get your desired
heating level.
5 If you stop using heater, turn off all of the power switch, then put off the plug.
6 If you want to move the heater, please turn off the switches, then put off the plug, and hand on the
handle on the back of the convector.
7. the function of swing.
Set to “1”= Swinging
Set to “0”= Swinging off
SAFETY PROTECTION SYSTEM
This unit has protection safeguards that shut off the unit when components become excessively hot
or if it tips over.
IF OVERHEATED
If heater becomes overheated, it will shut down automatically and the heater will turn off. Please
note that the red power light will go off and you smell a slight odor due to the coils overheating. This
is normal and the odor will subside.
Remove any nearby objects that may be causing overheat conditions. Keep at least three feet of
space on all sides of the unit to allow adequate air circulation.
Use the unit in a well-ventilated area.
The unit will start automatically when it has cooled sufficiently. Please note this cool-down period
could take 30-45 minutes. When heater is cooled the red power light will come back on and the
heater will begin to heat.