Beper 50.200, Инструкции по применению, Страница: 8 / 32

8
Travelling iron Use instructions
Before cleaning, always unplug the appliance.
To protect against electric shock, do not immerse cord, plug or any
parts of the appliance into water or other fluids.
Do not hold the appliance with wet hands or feet.
Do not hold the appliance with naked feet.
Do not expose the appliance to atmospheric agents such as rain,
wind, snow, hail.
Do not use the appliance near explosives, highly flammable mate-
rials, gases, burning flames, heaters.
DO NOT ALLOW CHILDREN, DISABLED PEOPLE OR
EVERY PEOPLE WITHOUT EXPERIENCE OR TECH-
NICAL ABILITY TO USE THE APPLIANCE IF THEY
ARE NOT PROPERLY WATCHED OVER. CLOSE SU-
PERVISION IS NECESSARY WHEN ANY APPLIANCE
USED BY OR NEAR CHILDREN.
MAKE SURE THAT CHILDREN DO NOT PLAY WITH
THIS APPLIANCE.
IF YOU DECIDE NOT TO USE THE APPLIANCE ANY
LONGER, MAKE IT UNSERVICEABLE BY SIMPLY
CUTTING THE SUPPLY CABLE AFTER DISCONNEC-
TING THE PLUG FROM THE SOCKET.
ALSO MAKE ANY DANGEROUS PARTS UNSERVICE-
ABLE, ESPECIALLY FOR CHILDREN WHO COULD
PLAY WITH THE APPLIANCE.
SOME WARNINGS:
• Never leave the iron unattended when it is connected to the power point.
• The iron must be used and left in the rest position (e.g. during ironing pauses)
on a stable and heat-resistant surface.
• Do not use the iron if it has been dropped, if there are signs of damage or if
water leaks from the soleplate.
• The travel iron is for short ironing periods only.
DESCRIPTION Fig.1
1. Foldaway handle/tank
2. Maximum water level indication in tank
3. Lid for tank
4. Steam button
5. Temperature control dial
6. Indicator for temperature dial
7. Soleplate
8. Thermostat light
9. Power cord
10. Release key for handle