Body Scale Use Instructions
6
Setting
Remove the scale from the packaging.
Turn the balance upside down carefully, and open the battery cover.
Remove the transparent film of the batteries.
Close the battery compartment cover.
Caution: Discharged batteries become dangerous for the possible loss of electrolyte fluid that is
very corrosive. To avoid damage to the appliance caused by this possibility, replace the exhausted
batteries without delay. Remember to remove the batteries when you are not going to use the balan-
ce for a long time.
Damages caused by battery liquid are not recognized.
Battery replacement
When the scale does not turn on or displays “Lo” it means that the batteries are exhausted. Replace them with
new ones.
Carefully, turn the balance upside down, so that the bottom of the scale is accessible.
Press the battery compartment in the direction indicated by the arrow and open the cover by tapping it.
Insert the batteries into the compartment according to the correct polarity. Pay attention to the correct polarity of
the connection. Incorrect installation can damage the scale.
Close the cover and then turn the scale back on.
Operation
The scale is equipped with a shock-sensitive switch. Give a slight touch on the platform to light the scale itself.
When the display turns on, get on the scale with both feet, hold them in the glass surface as much as possible
and stay still for a few seconds.
The display will automatically display the corresponding weight automatically; after approx. 10 seconds, the
display will automatically reset.
The scale automatically shuts off after 10 seconds of inactivity.
The scale weights up to 180 kg. To avoid any damage, if the “oL” message appears on the display immediately
get off from the scale as it indicates it is beyond the weighing limit.
Body weight is subject to changes during the day, so there may be weight differences.
Small changes in weighing are usually normal.
The scale is a precise tool and is very sensitive to movement of the body. For better precision: get on the scale,
relax your body, hold your head firm and stay still.
Note: there is a small switch near the battery compartment to switch the weight from kg to lb.
Cleaning the scale
The scale can be cleaned with a soft cloth, slightly dampened in warm water.
Never clean with diluents, abrasive products in general; these could damage the surface of the scale.
Do not immerse the scale in water.
Protect from liquid infiltration.
Keep away the scale from hair shampoos or preparations, cosmetics or bath solutions; they can cause damage
to the aesthetic parts and internal scale circuit.
Technical data
Power supply: lithium 1xcr2032 (included)
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
