Beper 30.069A, Инструкции по применению

Страница: 8 / 24

8
Electric Insect Killer Use instructions
2
5
1
3.4
6
INSTRUCTION FOR USE
Place the electric insect killer on a stable surface, minimum at 240 cm high from the ground.
Do not place the electric insect killer on inflammable objects or near gas, smoke explosive substan-
ces or steam.
Do not place the electric insect killer near curtains, shower/bath, swimming pool, or near any damp
place; keep away from heat sources higher than 50°C. Do not expose the appliance to rain, sun,
etc…
Do not put your hands/fingers or any objects into the protection grid.
Do not cover the electric insect killer with fabric or others materials; that could be very dangerous
and cause fire.
Do not use the electric insect killer near opened windows or doors that could be dangerous in case
of bad weather conditions.
If the appliance is wet, do not use it until it is completely dry.
Do not touch the electric insect killer with damp or wet hands, or if you do not wear shoes.
Do not pull on the supply cord to unplug the appliance.
Always unplug the electric insect killer if you need to move it, to clean it, to assembly or disassembly
the appliance.
Attention: do not fold the intern metallic grid.
PRODUCT AND ACCESSORIES
1. Switch on/off
2. Fixing chain
3.4. UV-A tubes
5. Slide base plate
6. Remote control
INSTRUCTION FOR USE
Place the appliance following carefully the instructions mentioned above.
Plug the supply cord in the supply power.
Switch on the appliance by pressing the button on/off (1).
The Neon lights (3 and 4) will light and the insects naturally attracted by the UV light will fly to the
electric metallic grid and will be fulminated instantaneously.
The insects will fall into the slide base plate (5).
After use, switch off the appliance by pressing the button on/off (1).
CLEANING AND CARE
Cleaning of the slide base plate and the grid
Before cleaning, switch off the appliance and unplug the supply cord.
Remove the slide base plate (5), empty and wash it using a detergent.
Replace the slide base plate.
Clean the metallic grid into the appliance with a flexible brush. Do not let insects on the grid.
Do not use metallic products to clean the appliance.
The plastic external parts can be cleaned with a soft cloth, water and natural detergent. Do not
immerge into water.
Make sure that every parts are completely dry before using again.