Benzlers C Series, Установка и обслуживание, Страница: 38 / 41

Appendix 4
Page 36 Issue 2
Lubricant Quantities (Litres)
M0512 M0612 M0712 M0812
1 0.3 0.6 1.2 2.5
2 0.3 0.6 1.2 2.5
3 0.3 0.6 1.2 2.5
4 0.4 0.7 1.5 3.5
5 0.4 0.6 1.2 2.5
6 0.5 1.0 2.0 4.1
M0122 M0222 M0322 M0422 M0522 M0622 M0722 M0822 M0921 M1021 M1321 M1421
1 0.5 0.8 0.8 1.5 1.5 2.0 2.6 4.2 10.5 11.0 17.0 24.0
2 0.8 1.2 1.2 1.8 1.8 2.0 2.9 6.3 12.0 22.0 31.0 49.0
3
0.6 0.7 0.7 1.6 1.6 1.9 2.7 5.4 12.0 22.0 31.0 49.0
4 0.8 1.2 1.2 1.8 1.8 1.7 3.0 7.3 12.0 19.0 28.0 41.0
5
0.7 1.1 1.1 2.0 2.0 2.2 3.2 6.8 16.8 32.0 47.0 72.0
6 1.0 1.4 1.4 2.6 2.6 2.8 4.7 9.3 16.4 26.0 38.0 65.0
M0132 M0232 M0332 M0432 M0532 M0632 M0732 M0832 M0931 M1031 M1331 M1431
1
0.6 0.8 0.8 1.6 1.6 2.1 2.7 4.4 11.5 11.0 18.0 24.5
2 0.9 1.3 1.3 1.9 1.9 2.1 3.0 6.5 12.0 24.0 33.0 50.0
3
0.7 0.7 0.7 1.7 1.7 2.0 2.8 5.6 12.0 24.0 33.0 50.0
4 0.9 1.2 1.2 1.9 1.9 1.8 3.1 7.5 12.0 21.0 30.0 43.0
5
0.7 1.1 1.1 2.1 2.1 2.3 3.3 6.8 16.8 32.0 47.0 72.0
6
1.1 1.6 1.6 2.7 2.7 2.9 4.8 9.7 16.5 28.0 40.0 67.0
M0342 M0442 M0542 M0642 M0742 M0842 M0941 M1041 M1341 M1441
M0122 M0322 M0322 M0322 M0322 M0522 M0522 M0722 M0722 M0722
M0322 M0422 M0522 M0622 M0722 M0822 M0921 M1021 M1321 M1421
M0352 M0452 M0552 M0652 M0752 M0852 M0951 M1051 M1351 M1451
M0132 M0332 M0332 M0332 M0332 M0532 M0532 M0732 M0732 M0732
M0322 M0422 M0522 M0622 M0722 M0822 M0921 M1021 M1321 M1421
SERIES M LUBRICATION
SECONDARY UNIT
PRIMARY STAGE QUADRUPLE REDUCTION (Quantities obtained from above double and triple sizes indicated)
PRIMARY STAGE QUINTUPLE REDUCTION (Quantities obtained from above double and triple sizes indicated)
M01,M02,M03,M04,M05,M06,& M07 Units, are supplied f actory filled w ith EP mineral oil (Grade 6E) appropriate to the intended
mounting position. If the unit is supplied w ithout lubricant the unit must be filled w ith the correct lubricant and quantity as listed below .
M08,M09,M10,M13,& M14 Units, require filling w ith EP mineral oil (Grade 6E)
Lubricant quantities are approximate fill until oil escapes from the level plug hole, fit ventilator plug (w hen supplied) in the appropriate
position for the required mounting position. If the unit is supplied w ithout lubricant the unit must be filled w ith the correct lubricant and
quantity.
Unit Size
Unit Size
PRIMARY UNIT
PRIMARY UNIT
SECONDARY UNIT
M
O
UNT
IN
G
PO
SI
T
IO
N
Unit Size
SINGLE REDUCTION
DOUBLE REDUCTION & FINAL STAGE QUADRUPLE OR QUINTUPLE REDUCTION
TRIPLE REDUCTION
Unit Size
M
O
UN
T
ING
PO
SI
T
IO
N
Unit Size
M
O
UN
T
ING
PO
S
IT
IO
N