Assembly & Adjustments
Problem Solving
“Left pedal will not screw in”
Solution: Re-check left pedal threads and assemble in an anticlockwise direction due to acw thread.
“Knocking noise from crank area”
Solution: Check sideways play on crank arms and re-tighten crank nut if necessary.
“Knocking / uneven action on pedals”
Solution: Loosen pedals 2 full turns and then re-tighten securely.
“Brake Pads chatter / vibrate”
Solution: Spray Flywheel with a light misting of WD-40.
LUBRICATION AND MAINTENANCE
The moving parts in your Training Cycle are all pre-lubricated at
assembly and should not require further attention. We recommend
however that it is used inside and stored in a dry condition.
To clean the metal and plastic components, a general household
cleaner can be used, but please be sure to dry the cycle and any
attachments before use.
In the interest of safety, do NOT
use polish or any lubricant on
the saddle handlebars or pedals.
Note
Page 1
6
SC1-P Aerobic Training Cycle