Beny Sports V-fit AR1, Сборка и руководство пользователя, Страница: 17 / 23

Assembly
Page 18 Air Rower
Slide the assembled Seat Carriage (9) onto the Main Rowing Rail
from the back and fit a Seat Carriage Stop Assembly (11) to each
side of the Rail with the 2 x M8 Small OD Flat Washers (48) and 2 x
M8 Plain Nuts (44) which should be fitted on the inside of the rail.
Cap the end with the Rowing Rail End Cap (13). 5
9
13
49
40
11
44
44
48
48
11
44
2
Compliance to BS EN 957
requires that an additional /
alternative seat stop to be fitted.
If desired, please fit the 1 x M8 x
20mm Hex Bolt (40) and 1 x M8
Large OD Flat Washer (49) in the
hole on the top of the Main
Rowing Rail and secure in place
from the underside using 1 x M8
Plain Nut (44). A hard rubber
buffer is pre-fitted to the
underside of the Seat Carriage
(9) to act as a stop.
Note
For your convenience, the Velcro style adjustable Footplate Straps
(16) are pre-fitted to the Footplates (15) in the lower of the 2
positioning options. Slide the Footplate Crossbar (17) into the Main
Frame and then slide a Footplate Crossbar Spacer (18) onto each end
of the bar, followed by a Footplate, securing in place with 2 x M10
Large OD Flat Washers (51) and 2 x M10 Nylon Locknuts (47). 6
51
47
16
15
18
18
15
51
47
16