5
Bentone
•
Care must be taken by the installer to ensure that no electrical cables
or fuel lines are pinched or otherwise damaged during installation or
service.
•
Sharp edges can occur on, for example: fl ame tube, fan wheel and air
damper.
•
The gas outlet from the pressure regulator must be confi gured in
accordance with applicable regulations and lead to a safe area.
- before fi rst start:
•
The burner must not be put into operation without proper safety and
protection devices.
•
Permitted ambient temperature during operation -10 to +60 °C. Max.
80% relative humidity, no condensation.
•
The surface temperature of the burner’s components may exceed
60 °C.
•
Handle with caution – the burner has moving parts, and there is risk
of crushing injuries.
•
Seal inspections must be performed during installation and servicing
to prevent leakage.
•
Fitting and installation work has been completed and approved.
•
Electrical installation has been correctly performed.
•
Flue gas ducts and combustion air ducts are not blocked.
•
All actuators and control and safety devices are in working order and
correctly set.
•
If the boiler is equipped with an access hatch, this must be equipped
with a hatch opening switch connected to the burner’s safety system.
•
When in operation, the burner’s noise level can exceed 85 dBA – use
hearing protection!
- Operation:
•
Carry out all stipulated settings, service and inspection work within
the set time.
1.3
What to do if you smell gas
•
Turn off the fuel supply.
•
Turn off the device and remove the boiler from operation.
•
Open windows and doors.
•
Prevent open fl ames or sparking, e.g. do not turn lights on or off, do
not use any electrical appliances or mobile phones.
•
Evacuate the building.
•
Notify the installer or gas supplier of the problem so that it can be
rectifi ed.
Содержание BG 400-2 Biogas
Страница 31: ...160303 613 _ _ 31 Bentone 10 3 5 Setting the main flow 1 2 3 Loosen Do not use any force...
Страница 47: ......
Страница 48: ...Enertech AB P O Box 309 SE 341 26 Ljungby www bentone com...