SCOUT200 Series Quick Start Guide 4
S1 Collector App – Main Buttons
Back
/
Home
— Return to the previous screen.
Tap and hold to display a list of recently accessed screens
including the app’s main menu.
ROUTES
— Record vibration for a predetermined list of machine
locations.
MEASURE
— Take an off-route recording such as spectrum
and waveform measurements.
SYNC
— Send recorded data from the S1 Collector app
to System 1. Receive updated folder and route information from
System 1.
RECORD REVIEW
— Conduct a quick onsite review of recordings
on the handheld.
DEVICES
— Pair the handheld with a data collector and view information about the paired
device.
SETTINGS
— Set preferences for your industrial handheld, app, database, language and
measurement units.
Sync Data
Sync Data Using USB Tethering
1.
On the S1 Collector app's main menu, select
SYNC
.
2.
Select the
USB
option.
3.
Use a USB cable to connect the device to the computer hosting System 1.
4.
From the displayed message on the handheld, select
OK
. Device settings are displayed.
5.
In
Tethering & portable hotspot
, enable
USB tethering
.
6.
Return to the S1 Collector application.
7.
To sync data in System 1, select
Instrument Mode
.
For details, see SCOUT200 Series Installation and Operation Manual (document 109M1269).
Sync Data Using Wi-Fi
To sync data using Wi-Fi, the handheld and computer hosting System 1 must be on the same network
subnet.
1.
Select
SYNC
from the S1 Collector app's main menu.
2.
Select
Wi-Fi
.
3.
Use
Instrument Mode
in System 1 to sync data.
Sync Data with Remote Comms
See SCOUT200 Series Installation and Operation Manual (document 109M1269).
