Bentel academy 4, Руководство пользователя

Страница: 23 / 28

Superkeys
Each Superkey controls a specific command. Superkey commands do not
require Code PINs.
Press required key , , , or for approximately 4 seconds.
The selected key will take on Superkey status, and the assigned command
will be activated.
COMMANDS SUPERKEYS
Activate Instant alarm call on the
Digital Communicator and Dialler
,
View alarm memory
,
Trouble Viewing mode
Instant alarm call Superkeys , ,
Events corresponding to superkeys , and must be programmed
by the installer. The 3 alarm types (Fire, Danger and Police Request) can
each be assigned to a specific Event Call.
Event calls can be activated from the keypad by pressing the correspond-
ing key for approximately 4 seconds. The icon on the key identifies the
alarm type.
Fire alarm Danger alarm Police
The Digital Communicator and Dialler will be activated shortly after the
command acceptance beep.
View Alarm Memory Superkey
Press key for approximately 4 seconds. A long high-tone beep will con-
firm command acceptance.
Any alarm and / or tamper events that occur after Reset Alarm Memory will
be shown on keys
through (corresponding to the zones), as follows:
----
ON
indicates alarm memory on the corresponding zone
----
Slow flashing
indicates tamper memory on the corresponding zone
----
Fast flashing
indicates alarm and tamper memory on the corresponding
zone.
CONTROL FROM KEYPAD
23