n
FITTING/REMOVAL OF A DETECTOR
1)
Stick the address number labels to the Address Flag and de-
tector.
2)
Fit the Address Flag to the detector as shown in Fig. 7.
3)
Place the detector onto the base and turn until it locates on the
base, then turn clockwise until fully located (the raised ribs of
the base and detector are aligned).
4)
If the detector is removed, the Address Flag will remain with the
base, ensuring that detectors are not accidentally returned to
the wrong base.
5)
When a locking key has been inserted into the base, the detec-
tor may only be removed by using a lock release tool to de-
press the locking pin.
6)
The temporary park plunger is used to allow the detector to be
placed in a park position once mounted to the base. This al-
lows the detector to be turned anti clockwise past the location
position to break electrical contact with the base. This means
the cabling to the detector may be tested with the detector
mounted to the base.
n
COMMISSIONING
Commission the fitted detector as detailed in Installation/Commis-
sioning document.
ORDERING INFORMATION
FC450IB:
5" Isolator Base
FC450EMB: Euro Mounting Box
Base AccessoryTerminal (pack of 10)
RECYCLING INFORMATION
Customers are recommended to dispose of their used equipments
(panels, detectors, sirens, and other devices) in an environmentally
sound manner. Potential methods include reuse of parts or whole
products and recycling of products, components, and/or materials.
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT
(WEEE) DIRECTIVE
In the European Union, this label indicates that this
product should NOT be disposed of with household
waste. It should be deposited at an appropriate facility
to enable recovery and recycling.
The manufacturer reserves the right to change the technical speci-
fications of this product without prior notice.
FIG. 6
Fitting of Locking Device
INCAVI DI BLOCCAGGIO
RETAINING DEPRESSIONS
RIENTRANZA DI MONTAGGIO
MOUNTING RECESS
PARTE SAGOMATA A ´D`
´D` SHAPED PART
CANALE SAGOMATO A ´U`
´U` SHAPED CHANNEL
SPORGENZE DI BLOCCAGGIO
RETAINING PIMPLES
FIG. 7
Fitting Address Flag
