Bentel Security BGSM-100 Series, Руководство пользователя

Страница: 40 / 72

40
GSM/GPRS Alarm Communicators
PROGRAMMING VIA PC
, ,
, ,
,
For proper function of this Communicator, use a 32 K SIM CARD (or higher).
For the programming using the PC-Link cable (see Fig. 5) must be connected to the Connector [
9
] of the Communicator and a
COM port on the PC; the BGSM-120 Console application is also required. The PC-Link cable shown in Figure 5a, or the PC-
Link cable shown in Figure 5b, can be used for the connection. Make sure you insert the PC-Link cable connector in the right
way. Once the PC-Link cable has been connected, set the computer COM port through the the
Options->Serial ports. Check
the serial link and the serial port settings in case of communication problem, or use a different USB-RS232 adapter.
Viewing the Device Settings
To view the Communicator settings on the screen, use the Upload from board icon.
Downloading the Device Settings
Once programming has been completed (or an uploaded file containing existing data has been modified), download the data
into the Device, using the
Download to board icon.
Preliminary operations
When the application starts, you will be presented with the Main window: if you use the mouse to click the menu option
Untitled
#1
in the top left-hand part, two sections appear.
The following sections may be found within the general parameters section:
Customer informations : this section can be used to set the Communicator series ( BGSM-100 or BGSM-120 ),
or to recall and update the configuration corresponding to a particular client as follows:
1.
Left-click on the application.
2.
Enter or update the information relating to the customer and the system. Click to confirm.
Upload from board : If this icon is selected, the data programmed on the board is loaded onto the PC.
Download to board : If this icon is selected, the programmed data is sent to the board.
Factory defaults: If this icon is selected, the initial default settings are restored.
Board reset: If this icon is selected, the Communicator is reset.
Fig. 5 - Diagram of the PC-Link connection cable