BV200 Plasma Viscometer Mk2/3 Customer User
Manual
Issue 9
th
Sep 2020 - Rev 1.8
Page 33 of 53
Scan the decontamination additive used or enter the barcode manually
8.
a. When using Benson Viscometers cleaning agents
i.
Select “Single” or “Bulk” additive as appropriate
ii.
Select “Scan Barcode”, Then scan the barcode on each single use tube or the bulk
additive, using the barcode scanner
iii. Alternatively
enter manually by selecting “Manual Entry” and use the keyboard to
type the barcode from the single use tube or bulk additive
iv.
When complete select “Click to Finish”
a. It is recommended that Benson Viscometer cleaning agents are used. However, in
the event Benson Viscometers cleaning agents are not used, you will need to seek
approval to override this feature from a Senior within the laboratory. This can be
completed as per the below instructions.
i.
Tick the box “Disable Decontamination Additive barcode check at this time”
ii. Enter initials
iii.
When complete select “Click to Finish”
