COMPLIANCE NOTICES
The Benson RS/UHA2 range of warm air heaters detailed herewith are manufactured for Benson Heating within the
parameters of ISO 9002.
The Benson RS/UHA2 Range has been independently tested and assessed, and has been found to meet the Essential
Requirement of the following European Directives:
Gas appliance Directive (90/396/EEC)
Machinery Directive (89/392/EEC) 91368/EEC 93/44/EEC 93/65/EEC
Low Voltage Directive (73/23/EEC
Electromagnetic Compatibility Directive (98/336/EEC and 91/31/EEC)
Product Liability Directive (65/374/EEC)
The manufacturer has taken reasonable and practical steps to ensure that Benson RS/UHA2 Range of Heaters are safe
and without risk when properly used. These heaters should therefore only be used in the manner and purpose for which
they were intended, and in accordance with the recommendations detailed herewith.
The heaters have been designed, manufactured, assembled, inspected, and tested, with safety and quality in mind, there
are certain basic precautions which the installer and user should be aware of, and they are strongly advised to read the
appropriate sections of the information pack accompanying the heater, prior to installation or use.
Benson Heating supports all new products being supplied to their customers with a comprehensive information pack; this
clearly defines mandatory instructions for the safe installation, use, and maintenance, of the appliance(s).
Where proprietary items are incorporated into Benson Heating products, detailed information and instructions are also
provided as part of the information pack.
It is the responsibility of the installer, owner, user, or hirer, of such products supplied by Benson Heating, to ensure that
they are familiar with the appropriate information/manuals, supplied by the manufacturer, and that they are suitably
aware of the purpose of the manuals and the safety instructions. In addition, operators must be suitably trained in the use
of the appliance so as to ensure its continued safe and efficient use.
Benson Heating has a commitment to continuous improvement, and therefore reserves the right to amend or change the
specification of the RS/UHA2Heater range subject to agreement from The Notified Body.
Contained within the text of the manual, the words '
Caution
' and '
Warning
' are used to highlight certain points.
Caution
is used when failure to follow or implement the instruction(s) can lead to premature failure or damage to the
heater or its component parts.
Warning
is used when failure to heed or implement the instruction(s) can lead to not only component damage, but also
to a hazardous situation being created where there is a risk of personal injury.
Notified Body PIN Reference is
RANGE
Type Model Code
1 RS/UHA2
50
3TAIT2C016
2 RS/UHA2
80
3TAIT2C026
3 RS/UHA2
105
3TAIT2C036
4 RS/UHA2
140
3TAIT2C046
5 RS/UHA2
200
3TAIT2C066
6 RS/UHA2
260
3TAIT2C086
7 RS/UHA2
325
3TAIT2C106
