BENRUBI izzy IZ-1105 MAGNUM, Инструкция по эксплуатации, Страница: 21 / 23

20
• If the iron stays in its base for 1 hour and there is no function, such as button operation or
shaking the iron within 1 hour, a beep will sound, the power indicator light (8) will flash twice and
the appliance will enter in standby mode. To exit standby mode and restart, press the On/Off
button (8).
Tips for Better Results
• Divide the washing according to the correct ironing temperatures and in accordance with the
International Fabric Care Code, which is on the labels label.
• If you do not know what fabric is made of fabric, determine the appropriate ironing temperature
by ironing a point on the fabric that is not apparent when wearing it or using it.
• Silk, woolen and synthetic fabrics should be ironed from the riverside so as not to create shiny
patches.
• First iron the fabrics that require the lowest temperature and then the fabrics that require a
higher temperature.
• Do not iron metal objects such as zippers, hooks, rings, etc. as these may scratch the plate.
• Fabrics such as velvet and wool and accessories such as gloves, bags, etc. They will recover
the brand new look and texture by simply passing the iron near the surface of the cloth and
pressing the steam button.
• Fabrics that have some kind of finishing (glossy surfaces, wrinkles, etc.) can be ironed at low
temperatures.
• For fabrics containing different fibers in their composition, always choose the appropriate
temperature for ironing, which corresponds to the highest percentage of fabric. For example, if
a fabric contains 60% polyester and 40% cotton, you should choose the appropriate temperature
for the polyester and iron the fabric without steam.
• For woolen fabrics, select the middle temperature and press the steam button intermittently to
achieve small steam emissions without touching the iron on the cloth.
Boiler Cleaning
If the “Auto-clean” indication light (27) illuminates, it indicates that the appliance needs to be
cleaned due to scale build-up.
1. Before cleaning, make sure the “Auto-clean” indication light (27) is on.
2. Unplug the appliance and allow the appliance to cool down completely.
3. Remove the water tank (14), remove the iron from the base and turn the base upside down.
4. Turn the desalination valve (17) counterclockwise and remove.
CAUTION: To avoid the risk of burns, make sure that the appliance has cooled down
completely before removing the valve.
5. Fill the boiler with 200ml of water.
ATTENTION! To prevent overflow and damage to the appliance, do not exceed 200ml of
water.
6. Shake the boiler and drain the water into a sink or a pot.
7. If the water is too dirty, repeat the process until it is cleaned.
8. Make sure the valve is screwed in tightly before using the appliance.
9. Before ironing, press the steam button for a few seconds to make sure that the joint is clear.
The above procedure must be done either above the sink or over a container.
10. At this point, continue ironing.