BENRUBI CM 6626A, Руководство пользователя

Страница: 21 / 28

22
EN
Εspresso Maker
CM 6626A
IMPoRTANT
: You can not brew
espresso if you have not flushed the
machine at first, the flushing cycle
causes the boiler to fill with water. If
you have not used the machine for a
few days, you have to flush it with fresh
water before you use it again.
Preheating the Espresso
Machine
To ensure your espresso coffee is brewed
at the right temperature, it is essential that
the appliance is pre-heated.
1. Check that the steam/hot water knob is
firmly closed (turn clockwise) and that there
is water in the tank).
2. Put a jug under the steam/hot water
nozzle.
3. Fit the desired filter into the filter holder
(without coffee) and attaché to the machine
by positioning it under the boiler outlet
and turning to the right, ensure it is firmly
located.
4. Position 2 cups under the filter holder,
if you use the same cup that the coffee
will be served in it will be preheated.
Alternatively the cups can be preheated on
the cups warming tray.
5. Press the “On/Off” button and wait until the
ready light glows.
6. Press down the coffee/hot water button
and wait until two cups of water run into the
bowl.
7. Turn the steam/hot water knob anti-
clockwise and allow a little amount of water
to run into the jug.
8. Turn the steam/hot water knob clockwise
and turn all buttons to off setting.
9. Remove the filter holder and proceed to
make coffee using either ground coffee or
coffee pods.
To Make Espresso Using Ground
Coffee
• Preheat the appliance as above ‘Preheating
the espresso machine’.
• Check that there is water in the tank.
• Select the desired filter and fit into the filter
holder.
• Use the smaller filter for making one cup of
coffee (or when using coffee pods) and the
larger filter for 2 cups.
• Add the coffee using the measuring spoon
provided one full spoon per cup, level the
surface then lightly press with the tamper of
the measuring spoon, wipe off any coffee
around the rim.
• When buying ground coffee sure it is
suitable for espresso machines.
• Never press the coffee too firmly as the
coffee will come out slowly and the cream
will be of a dank colour, however, if it is
pressed too lightly ,the coffee will come out
too fast and the cream will be a light colour.
• Attach the filter holder into the boiler outlet,
turn it to the right to lock into position.
• Put one or two cups underneath, if making
one cup of coffee, centre your cup in the
middle.
• Ensure the On/Off button is pressed down
then the power light will glow, wait until
the ready light glows, then press down the
coffee/hot water button to maker espresso.
• When you’ve enough coffee—not too much
otherwise it will be too weak (optimum
dosage is 30ml per cup) release the coffee/
hot water button to the off position. If you
are not making any more coffee, release the
power button to the off position.