![background image](http://html1.mh-extra.com/html/benq/wit-mindduo/wit-mindduo_user-manual_2733823006.webp)
2
English
Using the Lamp
Turning On/Off the Lamp
To turn on or off the lamp, place your hand at least 2 cm under the on/off sensor [Figure
,
].
If the presence detection function is turned on, the lamp will turn on automatically when you
enter the detection area. To turn off the lamp, place your hand at least 2 cm under the on/off
sensor.
If power supply to the lamp is interrupted unexpectedly, the lamp will resume the factory
default mode upon the recovery of power supply.
Turning On/Off the Presence Detection Function
The presence detection function allows for the lamp to turn on
automatically when you enter the detection area [Figure
].
To turn on the presence detection function, move the presence
detection switch located on the lamp body to the ON position
[Figure
]. To turn the function off, move the switch to the
OFF position.
•
Do not block the presence sensor on the lamp. Otherwise the
presence detection function will not work properly.
•
When the presence detection function is on, the lamp will
turn off automatically to save power if you leave the detection
area for 30 minutes.
•
With the presence detection function turned on, the lamp will automatically calibrate the
Presence sensor when power is connected to the lamp or when the lamp is turned off. The
Lighting mode indicator will light up green and orange alternately, and the presence detection
function will be disabled temporarily.
Toggling Preset/Manual Lighting Modes
The lamp provides two preset lighting modes and one manual lighting mode that allows you to
adjust the brightness and color temperature manually.
To toggle among lighting modes, press and hold the rotary
knob on the lamp body for 2 seconds. The Lighting mode
indicator lights up in the Book reading mode (orange) and
Digital reading mode (green), and becomes off in the Manual
mode.
In the Manual mode, you can manually adjust color
temperature and brightness level using the rotary knob on the
lamp body.
1. Press the rotary knob to select the setting: the inner white
circle on the rotary knob represents brightness level setting,
and the outer color circle represents color temperature setting.
When pressing the knob, be careful not to block the on/off sensor.
C 1
C 2
Presence sensor
D
E
Lighting mode
Setting
Lighting mode
indicator color
Color temperature
Brightness level
Book reading
6000K
Automatically optimized
according to ambient lighting
condition
Orange
Digital reading
n
e
e
r
G
K
0
0
0
4
Manual
Adjustable
Adjustable
None (off)
Lighting mode indicator
Brightness level setting (white)
Color temperature setting (color)
Illuminance indicator
Содержание WiT MindDuo
