Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
"JSQPSU3PBE'BMM3JWFS."t t'BY
We reserve the right to change details of design, materials and finish.
XXXMJHIUPMJFSDPN½1IJMJQT(SPVQt %
Lighting Systems
F7000-16
1BHFPG
'4FSJFT1PJOU4PVSDF
Armstrong® TechZone™ Compatible
Features
1. Housing:
Unitized body of extruded high-purity alu
m
inu
m
, partially recycled
pre-consu
m
er, with die-cast ends welded in place;
m
atched to fluorescent
m
odules in the series. All
m
odules connect and suspend like fluorescent
m
odules.
2. Housing End:
Die-cast alu
m
inu
m
, welded to the ends of the housing.
3. End Cap:
Die-cast alu
m
inu
m
. Encloses the suspension cable and power feed
cord for the end of the run.
4. MR16:
La
m
ping is 75W
m
axi
m
u
m
. Transfor
m
er is electronic, 12V secondary,
120V or 277V pri
m
ary (as specified) Gi
m
bal ring provided as part of the
m
odule
and regressed into it. 45° ai
m
ing; accepts one standard Lytespan 2” (5.08c
m
)
filter or louver; regressed la
m
p pulls out for rela
m
ping. The 12” (30.48c
m
)
MR16
m
odule can be cantilevered fro
m
the end of a run of fluorescent fixtures.
5. Metal Halide:
La
m
ping is 20W or 39W. Ballast is electronic, 20W or 39W,
as specified, 120V or 277V, as specified. Connector accepts selected
Lytespan PowerArc Modular Track heads. Co
m
patible Track heads include
standard Lytespan PowerArc
m
odular track heads, which connect to the
m
odule. 8300, 8303, 8304, 8313, 8314, 8316, and 83W4 with applicable
reflectors. Track heads and applicable reflectors
m
ust be specified and
ordered separately, including appropriate finish. Finish is powder-coated,
baked ena
m
el, white or alu
m
inu
m
, as specified.
Ordering Information
1.63”
(4.14c
m
)
5.77” (14.66c
m
)
F7
Family
Series
3
Type
Lamps
Color
Wattage
Voltage
Length
Options
7
3
= Block
7
= Point Source
1
= 1 La
m
p
2
= 2 La
m
ps
4
= 4 La
m
ps
AL
= Alu
m
inu
m
WH
= White
7
= 20W HID
8
= 39W HID
9
= 75W MR16
1
= 120v
2
= 277v
1
= 1’ (30.48c
m
)
2
= 2’ (90.96c
m
)
4
= 4’ (121.92c
m
)
X4
= 4 Through
Wires
X5
= 5 Through
Wires
4
5
1
Co
m
plete Ordering Instructions below.
8. Power Feeds:
Standard 18/3 power feed is rated for 10 a
m
ps. X4 power
feed is 18/4 and is rated for 7 a
m
ps. Observe a
m
perage li
m
itations and pro-
vide additional Inter
m
ediate Power Cables, as required. When providing an
additional power feed, the through wiring fro
m
the previous
m
odule
m
ust be
disconnected fro
m
the cannon plug and capped.
9. Mounting:
Suspended by 1/16” (0.16c
m
) stainless steel cable, adjustable;
precisely
m
odular 1’ (30.48c
m
), 2’ (90.96c
m
) or 4’ (121.92c
m
) suspension
centers; 4 1/2” (11.43c
m
) white canopy.
Labels
UL, cUL and I.B.E.W.
6. Electrical:
Pre-wired with 18 gauge wires and polarized cannon plug con-
nectors for si
m
ultaneous
m
echanical/electrical connection. Factory installed
ballast disconnect allows the ballast to be disconnected fro
m
and reconnected
to inco
m
ing power under load without turning the entire circuit off.
7. Finish:
Powder-coated, baked ena
m
el, white or alu
m
inu
m
, as specified.
