BenQ WDP02, Руководство пользователя

Страница: 16 / 24

16 Installation
Powering up all devices and making source selection
1. Make sure that all the connected devices are supplied with power, and turn them all on. Once
being supplied with power, the transmitter and the receiver will be turned on automatically.
2. During the warm-up, the power indicator will blink in blue until the wireless connection between
the transmitter and the receiver is established. It takes about 15 ~ 20 seconds to boot up
successfully.
3. Ensure your projector is switched to the correct HDMI source.
1
2
3
Y/Pb/Pr
Video
RGB
S-Video
HDMI