32
Adjusting the screen refresh rate
Adjusting the screen refresh rate
You don’t have to choose the highest possible refresh rate on an LCD display, because it is not
technically possible for an LCD display to flicker. The best results are obtained by using the factory
modes already set in your computer. Check next chapter to see the factory modes:
Preset display
modes on page 33
.
You can choose 59.934 Hertz for the native resolution of 1920 x 1080. Not applicable in all models. Please
refer to the table on
page 31
.
1. Double click the
Display
icon in
Control Panel
.
2. From the
Display Properties
window, select the
Settings
tab and click the
Advanced
button.
3. Select the
Adapter
tab, and select an appropriate refresh rate to match one of the applicable
factory modes as listed in the specification table.
4. Click
Change
,
OK
, then
Yes
.
5. Close the
Display Properties
window.
Downloaded from ManualMonitor.com Manuals
