The OSD (On-Screen Display) menu
48
Heat status
This function allows you to check the thermal status of the display at any
time. The accuracy of the temperature indicated is 5 degrees Celsius.
Date and time
Adjusts current date and time for the display’s internal clock.
Schedule
•
Date and time
: Sets the current date and time.
•
Schedule
: Sets when to turn on or off the display and which input
source should be used for each schedule.
• Set the current time before you set the
Schedule
.
• When schedule settings overlap, the
Every day
setting takes priority over other
weekly settings.
• When schedule settings overlap, scheduled power-on time takes priority over
scheduled power-off time.
• If two schedules have the same settings, the first schedule on the list will take priority.
Monitor ID
Assigns an ID number for the current display when multiple displays are
connected.
DDC/CI
Turns the DDC/CI communication function
On
or
Off
.
HDMI CEC
Uses the HDMI CEC (Consumer Electronics Control) industry standard
protocol to share functionality between connected devices and the display.
To transfer system commands, you need to use an HDMI cable to connect
the display to a device equipped with HDMI CEC. Select
On
in this menu
and you can operate the main functionalities on your display and the
connected device with one remote control.
Synchronization with other devices through HDMI CEC may be available but not
guaranteed.
Power saving
Sets the display to reduce the power consumption automatically. Setting to
High
will bring the most power savings.
Auto signal
detection
Automatically detects available input sources.
Advanced
option reset
Resets all settings in the
Option
menu.
_+