Operation
40
Setting a preferred color temperature
Select
Color Temperature Fine Tuning
in the
Advanced menu
>
Picture
>
Advanced...
menu and press
OK
on the projector or remote control.
1.
Select
Color Temperature
and select Cool, Normal, Lamp Native
or Warm
by pressing
/
on the projector or remote control.
2.
Got to
Advanced...
>
Color Temperature Fine Tuning
and press
OK
on
the projector or remote control.
3.
Press / to select the item you want to change and adjust the values by
pressing / .
•
R Gain/G Gain/B Gain: Adjusts the contrast levels of Red, Green, and Blue.
•
R Offset/G Offset/B Offset: Adjusts the brightness levels of Red, Green, and
Blue.
4.
Press
MENU
on the projector or remote control to exit and save the settings.
Color Management
In most installation situations, color management will not be necessary, such as in
classroom, meeting room, or lounge room situations where lights remain on, or
where building external windows allow daylight into the room.
Only in permanent installations with controlled lighting levels such as boardrooms,
lecture theaters, or home theaters, should color management be considered. Color
management provides fine color control adjusent to allow for more accurate color
reproduction, should you require it.
Proper color management can only be achieved under controlled and reproducible
viewing conditions. You will need to use a colorimeter (color light meter), and
provide a set of suitable source images to measure color reproduction. These tools
are not provided with the projector, however, your projector supplier should be able
to provide you with suitable guidance, or even an experienced professional installer.
The
Color Management
provides six sets (RGBCMY) of colors to be adjusted.
When you select each color, you can independently adjust its range and saturation
according to your preference.
If you have purchased a test disc which contains various color test patterns and can be
used to test the color presentation on monitors, TVs, projectors, etc. You can project
any image from the disc on the screen and enter the
Color Management
menu to
make adjusents.
To adjust the settings:
1.
Go to the
Advanced menu
>
Picture
>
Advanced...
menu and select
Color
Management
.
2.
Press
OK
on the projector or remote control
and the
Color Management
page displays.
3.
Select Primary Color and press
/
to select a color from among Red,
Yellow, Green, Cyan, Blue, or Magenta.
