Positioning your projector
16
Positioning your projector
Choosing a location
Your room layout or personal preference will dictate which installation location you
select. Take into consideration the size and position of your screen, the location of a
suitable power outlet, as well as the location and distance between the projector and
the rest of your equipment.
Your projector is designed to be installed in one of four possible installation locations:
*There are two menu types for your selection. One is Basic, and the other is
Advanced. From the Basic menu, you can select Projector Position when the
projector is without input signal. From the Advanced menu, you can select
Projector Position in the System Setup: Basic menu. See
"Using the menus" on page
28
for details.
1.
Front Table
Select this location with the projector placed near the
floor in front of the screen. This is the most common
way to position the projector for quick setup and
portability.
2.
Front Ceiling
Select this location with the projector suspended
upside-down from the ceiling in front of the screen.
Purchase the BenQ Projector Ceiling Mounting Kit
from your dealer to mount your projector on the
ceiling.
Set
Front Ceiling
in the
Projector Position
* menu
after you turn the projector on.
3.
Rear Table
Select this location with the projector placed near the
floor behind the screen.
Note that a special rear projection screen is required.
Set
Rear Table
in the
Projector Position
* menu
after you turn the projector on.
4.
Rear Ceiling
Select this location with the projector suspended
upside-down from the ceiling behind the screen.
Note that a special rear projection screen and the
BenQ Projector Ceiling Mounting Kit are required for
this installation location.
Set
Rear Ceiling
in the
Projector Position
* menu
after you turn the projector on.
